良工阀门的四种分类你都清楚吗?

来源:http://www.jnlgvf.com/ 日期:2026-08-04 发布人:创始人

1、疏水阀

1. Drain valve

疏水阀又称疏水器,它的作用在于阻气排水,属于自动作用阀门。

A drain valve, also known as a trap, is an automatic valve that functions to block gas and drain water.

它的种类有浮桶式、恒温式、热动力式以及脉冲式等。

Its types include floating bucket, constant temperature, thermal power, and pulse type.

2、闸阀

2. Gate valve

闸阀又称闸门或闸板阀,它是利用闸板升降控制开闭的阀门,流体通过阀门时流向不变,因此阻力小。

Gate valve, also known as gate or gate valve, is a valve that uses gate lifting to control opening and closing. When fluid passes through the valve, the flow direction remains unchanged, resulting in low resistance.

闸阀和截止阀相比,在开启和关闭闸阀时省力,水流阻力较小,阀体比较短,当闸阀完全开启时,其阀板不受流动介质的冲刷磨损。

闸阀封面01

Compared with globe valves, gate valves require less effort to open and close, have lower water flow resistance, and have shorter valve bodies. When the gate valve is fully opened, its valve plate is not subject to erosion and wear by the flowing medium.

选用特点:密封性能好,流体阻力小,开启、关闭力较小,也有一定调节流量的性能,并且能从阀杆的升降高低看出阀的开度大小,主要用在一些大口径管道上。

Selection characteristics: Good sealing performance, low fluid resistance, small opening and closing force, also has certain flow regulation performance, and the opening size of the valve can be seen from the height of the valve stem. It is mainly used in some large-diameter pipelines.

3、止回阀

3. Check valve

止回阀又名单流阀或逆止阀,它是一种根据阀瓣前后的压力差而自动启闭的阀门。

A check valve, also known as a flow valve or a check valve, is a type of valve that automatically opens and closes based on the pressure difference before and after the valve disc.

它有严格的方向性,只许介质向一个方向流通,而阻止其逆向流动。

It has strict directionality, allowing the medium to flow only in one direction while preventing its reverse flow.

选用特点:一般适用于清洁介质,对于带固体颗粒和粘性较大的介质不适用。

Selection characteristics: Generally suitable for cleaning media, not suitable for media with solid particles and high viscosity.

4、截止阀

4. Globe valve

截止阀主要用于热水供应及高压蒸汽管路中,它结构简单,严密性较高,制造和维修方便,阻力比较大。

Globe valves are mainly used in hot water supply and high-pressure steam pipelines. They have a simple structure, high tightness, easy manufacturing and maintenance, and relatively high resistance.

流体经过截止阀时要转弯改变流向,因此水流阻力较大,所以安装时要注意流体“低进高出”,方向不能装反。

When the fluid passes through the shut-off valve, it needs to turn and change direction, so the water flow resistance is relatively high. Therefore, during installation, attention should be paid to the "low inlet and high outlet" of the fluid, and the direction should not be reversed.

选用特点:结构比闸阀简单,制造、维修方便,也可以调节流量,应用广泛。

Selection features: The structure is simpler than gate valves, easy to manufacture and maintain, and can also adjust flow rate, making it widely used.

热销产品:   执行驱动装置 通用工业阀门 冶金工业阀门 水利水务阀门 石油化工阀门 电力电站阀门 核电军工阀门

上海良工阀门山东济南销售处 网站备案号:鲁ICP备2021030403号-1    电话:15098929951 座机:0531—85816056 地址:济南天桥区历山北路198号国际五金机电城A区412号 
网址:http://www.jnlgvf.com/

【本站图片均由网站所有方提供,部分图片来源于网络,如无意中侵犯了某媒体或个人的知识产权,请来信或来电告之,本网站将立即删除。】