拿DN和PN直接询价,现场多半要返工

来源:http://www.jnlgvf.com/ 日期:2026-10-26 发布人:创始人

工业管线上非常贵的从来不是阀体本身,而是装完半年就内漏、停机换阀的那笔账。很多采购拿着“DN100、PN16”就去比价,结果介质一换、温度一升,密封面先扛不住。

The most expensive item on industrial pipelines is never the valve body itself, but the account of internal leakage, shutdown and valve replacement after half a year of installation. Many buyers use "DN100, PN16" to compare prices, but as soon as the medium is changed and the temperature rises, the sealing surface cannot withstand it.

截止阀01

选型先问自己四件事:

First, ask yourself four things when choosing a product:

介质是什么:清水空气用碳钢硬密封就够;含氯离子别迷信304,海水或盐雾环境直接上316L;强酸强碱走衬氟或衬塑阀,别拿裸金属硬顶。

What is the medium? A carbon steel hard seal is sufficient for clean water and air; Do not blindly trust 304 for chloride ions, and directly use 316L in seawater or salt spray environments; use fluorine or plastic lined valves for strong acids and alkalis, and do not use bare metal hardtops.

温度和压力一起看:PN16的碳钢阀用到200℃以上要降额,高温蒸汽站优先选波纹管密封截止阀,填料函不漏汽;低温深冷要加长阀颈,防止填料结冰。

Temperature and pressure should be considered together: PN16 carbon steel valves should be downgraded when used above 200 ℃, and corrugated pipe sealed globe valves should be preferred for high-temperature steam stations, with no steam leakage in the packing box; Low temperature cryogenic treatment requires lengthening the valve neck to prevent the packing from freezing.

动作频率:一天开关几十次的支路用球阀或蝶阀,启闭快、力矩小;主干隔离用闸阀,流阻小但别拿来节流,半开状态阀板会被介质冲出沟槽。

Action frequency: Ball valves or butterfly valves are used for branches that are opened and closed dozens of times a day, with fast opening and closing and low torque; Gate valves are used for main isolation, with low flow resistance but should not be used for throttling. The valve plate in a semi open state will be flushed out of the groove by the medium.

流向别装反:截止阀常规“低进高出”,止回阀、减压阀认准阀体箭头,装反不是关不严就是直接失效。

Flow direction should not be reversed: globe valves are usually "low in, high out", and check valves and pressure reducing valves should identify the valve body arrows. Reverse installation can result in either poor closure or direct failure.

下单前再核对三份东西:阀体材质单、密封面堆焊/软密封材质、随货的试压报告和合格证。同规格报价低得离谱的,先怀疑是不是用铸铁顶铸钢、用铜包铝顶铜件。

Before placing an order, double check three items: valve body material list, sealing surface welding/soft sealing material, accompanying pressure test report, and certificate of conformity. If the quotation for the same specification is unreasonably low, we first suspect that it may be using cast iron top cast steel or copper-clad aluminum top copper parts.

顺手记一条安装红线:管路焊完建议吹扫再装阀,焊渣卡在密封面上,再贵的阀也撑不过一个检修周期。

Just remember an installation red line: After welding the pipeline, it must be blown before installing the valve. Welding slag gets stuck on the sealing surface, and even the most expensive valve cannot withstand a maintenance cycle.

把“介质定材质、温压定等级、频率定结构、资料定真假”这四句钉在采购单旁边,返修率会自己降下来。

Pin the four sentences "medium determines material, temperature and pressure determine grade, frequency determines structure, and data determines authenticity" next to the purchase order, and the repair rate will decrease on its own.

热销产品:   执行驱动装置 通用工业阀门 冶金工业阀门 水利水务阀门 石油化工阀门 电力电站阀门 核电军工阀门

上海良工阀门山东济南销售处 网站备案号:鲁ICP备2021030403号-1    电话:15098929951 座机:0531—85816056 地址:济南天桥区历山北路198号国际五金机电城A区412号 
网址:http://www.jnlgvf.com/

【本站图片均由网站所有方提供,部分图片来源于网络,如无意中侵犯了某媒体或个人的知识产权,请来信或来电告之,本网站将立即删除。】