图纸写了DN和PN,为什么半年还是内漏

来源:http://www.jnlgvf.com/ 日期:2026-11-04 发布人:创始人

工业管线上,贵的从来不是阀体,是装完半年就漏、停机换阀的那笔账。很多采购拿着“DN100、PN16”去比价,介质一换、温度一升,密封面先扛不住。

On industrial pipelines, the expensive ones are never valve bodies, but the ones that leak, shut down, and replace valves after half a year of installation. Many buyers use "DN100, PN16" to compare prices, but as soon as the medium is changed and the temperature rises, the sealing surface cannot withstand it.

蝶阀01

选型先补齐四组参数,别只报口径压力:

Complete the four sets of parameters for selection first, don't just report the caliber pressure:

介质:清水/蒸汽/油品/酸碱/含颗粒。含氯别迷信304,海水和盐雾直接316L;强酸强碱走衬氟衬塑,别拿裸金属硬顶。

Medium: clear water/steam/oil/acid alkali/containing particles. Chlorine containing superstition 304, direct 316L for seawater and salt spray; strong acid and alkali lining fluorine lining plastic, do not use bare metal hardtop.

温度压力一起看:PN16碳钢用到200℃以上要降额;高温蒸汽选波纹管密封截止阀,填料函不漏汽;深冷介质加长阀颈防结冰。

Temperature and pressure should be considered together: PN16 carbon steel should be downgraded when used above 200 ℃; High temperature steam selection bellows sealed globe valve, with no steam leakage in the packing box; Extended valve neck anti icing for cryogenic media.

功能别混用:闸阀截断、截止阀调节、球阀快切、止回阀防倒流。把截断阀当节流阀用,密封面三个月就被冲蚀。

Do not mix functions: gate valve cutoff, globe valve adjustment, ball valve quick cut, check valve anti backflow. Using a shut-off valve as a throttle valve will erode the sealing surface within three months.

驱动方式:手动/电动/气动按安装位选,电动要带转矩保护和手动应急,远程控制不能省限位。

Drive mode: manual/electric/pneumatic according to the installation position, electric should have torque protection and manual emergency, remote control cannot save limit.

询价单里容易漏的隐藏项:

Hidden items that are easily overlooked in the inquiry form:

阀体材质、密封面材质(硬密封/软密封)、法兰标准、连接面形式、执行器防护等级、是否要防火/防静电/低泄漏填料。只写型号不写这些,到货和图纸对不上。

Valve body material, sealing surface material (hard seal/soft seal), flange standard, connection surface form, actuator protection level, whether fireproof/anti-static/low leakage packing is required. Just write the model without these, the arrival and drawings do not match.

到货验收三件事:

Three things for arrival acceptance:

铭牌炉号、材质证明、水压/气密试验报告一一对应;

The nameplate furnace number, material certificate, and water pressure/air tightness test report correspond one-to-one;

阀体铸造标识清晰,无补焊掩盖;

The valve body casting label is clear and there is no welding cover up;

核电、电站类特种阀,补齐无损检测和热处理资料。

Special valves for nuclear power and power plants, complete non-destructive testing and heat treatment data.

合同里把“资料交付+质保追溯”写进去,比单纯压单价管用。阀门省下的钱,不够一次非计划停机赔。

Including "data delivery+quality assurance traceability" in the contract is more effective than simply suppressing the unit price. The money saved by the valve is not enough to compensate for an unplanned shutdown.

热销产品:   执行驱动装置 通用工业阀门 冶金工业阀门 水利水务阀门 石油化工阀门 电力电站阀门 核电军工阀门

上海良工阀门山东济南销售处 网站备案号:鲁ICP备2021030403号-1    电话:15098929951 座机:0531—85816056 地址:济南天桥区历山北路198号国际五金机电城A区412号 
网址:http://www.jnlgvf.com/

【本站图片均由网站所有方提供,部分图片来源于网络,如无意中侵犯了某媒体或个人的知识产权,请来信或来电告之,本网站将立即删除。】