夹式止回阀是一种通用的单向流体阀。良工阀门厂告诉你它重量轻,体积小,易于安装在法兰之间。阀门内部由两个半圆形弹簧和板面组成。阀门的弹簧变形通过销子固定在阀体上,使阀板关闭。流体压力使弹簧快速打开,可以保护管道免受水锤损坏。
Clamp check valve is a universal one-way fluid valve. Lianggong Valve Factory tells you that it is lightweight, small in size, and easy to install between flanges. The interior of the valve consists of two semicircular springs and a plate surface. The spring deformation of the valve is fixed to the valve body through a pin, causing the valve plate to close. The fluid pressure causes the spring to open quickly, which can protect the pipeline from water hammer damage.
良工阀门
Lianggong Valve
良工阀门提醒安装注意事项:
Lianggong Valve Reminder Installation Precautions:
放置管道时,应注意使夹式止回阀的通向与流体流向一致;
When placing pipelines, attention should be paid to ensuring that the direction of the clamp check valve is consistent with the flow direction of the fluid;
安装在垂直放置的管道中。对于水平放置的管道,垂直放置夹式止回阀;
Installed in vertically placed pipelines. For horizontally placed pipelines, vertically place clamp check valves;
将伸缩管用于夹式止回阀和蝶阀之间,切勿将其与其他阀门直接连接;
Use the expansion tube between the clamp check valve and butterfly valve, and do not directly connect it to other valves;
避免在阀板操作半径范围内加入管接头和堵塞物;
Avoid adding pipe joints and blockages within the operating radius of the valve plate;
不能在夹式止回阀前或后安装变径管;
It is not allowed to install a reducing pipe in front or behind the clamp check valve;
对夹式止回阀安装在弯头附近时,要注意留有足够的空间;
When installing the clamp type check valve near the elbow, it is important to leave sufficient space;
对夹式止回阀安装在水泵出口时,至少流出六倍阀门直径的空间,以确保蝶板受流体影响。
When installing the clamp type check valve at the outlet of the water pump, there should be at least six times the diameter of the valve to ensure that the butterfly plate is affected by the fluid.