At present, there are many types of steam drain valves, but their working principle is to use the difference between the height, temperature and flow rate of steam and condensate. The manufacturer said that the steam drain valve can be opened and closed through various mechanisms to prevent steam drainage. It has three main energy-saving effects. Quickly discharge the condensate generated in the steam using equipment to keep the heating efficiency of the steam using equipment in a better state, so that the condensate in the equipment does not form retention, and greatly ensure the steam space in the equipment, thus maintaining a higher heating efficiency. The valve manufacturer of Xinjiang Lianggong said that once the steam drain valve could not fully play its role, the performance of the steam using equipment would be greatly affected due to the retention of condensate, and sometimes even the production equipment would be completely paralyzed.

第二，在启动时快速排出设备中的空气和低温冷凝水，从而缩短预热运行时间。蒸汽开始时，蒸汽输送管道和蒸汽使用设备内部充满空气，如果不排除蒸汽，不能进入蒸汽。此外，在蒸汽输送管道和蒸汽使用设备温度达到蒸汽温度时，初始低温冷凝水也应迅速排放，使设备在短时间内正常运行，新疆良工阀门厂家说您这是提高生产效率的重要条件，特别是间歇性生产，由于预热时间缩短，也缩短了每次操作时间，由于处理次数增加，终可以增加产量。过去，在预热操作过程中，打开旁路阀初始空气和低温冷凝水。

Second, the air and low temperature condensate in the equipment shall be quickly discharged during startup, so as to shorten the preheating operation time. At the beginning of steam, the steam transmission pipeline and steam using equipment are filled with air. If the steam is not discharged, it cannot enter the steam. In addition, when the temperature of the steam transmission pipeline and steam equipment reaches the steam temperature, the initial low temperature condensate should also be discharged quickly, so that the equipment can operate normally in a short time. The valve manufacturer of Xinjiang Lianggong said that this is an important condition to improve production efficiency, especially intermittent production. Because the preheating time is shortened, each operation time is also shortened, and the output can eventually be increased due to the increase of processing times. In the past, in the process of preheating operation, first open the bypass valve for initial air and low-temperature condensate\

现在，由于选择了适当的蒸汽排水阀，它不仅可以自动排出初始空气和初始低温冷凝水，还可以节省人力。减少蒸汽排水阀本身的蒸汽消耗。新疆良工阀门厂家说所谓的蒸汽排水阀本身的蒸汽消耗量，一般是指蒸汽泄漏，是蒸汽排水阀所需的蒸汽量和散热损失之和。

Now, due to the proper steam drain valve, it can not only automatically discharge the initial air and initial low-temperature condensate, but also save manpower. Reduce steam consumption of steam drain valve itself. Xinjiang Lianggong valve manufacturer said that the so-called steam consumption of the steam drain valve itself generally refers to steam leakage, which is the sum of the amount of steam required by the steam drain valve and the heat loss.

以上的精彩内容均来自：上海良工阀门山东销售处更多的精彩内容请点击进入我们的网站：http://www.jnlgvf.com进行交流学习，我们后续会不断的为您提供分享，敬请期待！

The above highlights are from: Shanghai Lianggong Valve Shandong Sales Office. For more highlights, please click to enter our website: http://www.jnlgvf.com We will continue to share with you in the future!