A spring fully open safety valve with nitrogen sealing function, with a nozzle type valve seat, a separate valve body from the valve seat, and an enlarged outlet branch pipe. Due to its large opening height, its emission capacity is relatively high. At this opening height, the displacement of the medium passing through is determined by the cross-sectional area of the valve seat channel rather than the cross-sectional area of the annular gap where the valve disc opens. In order to achieve a large opening height, both the principle of increasing the impact area of the medium and the principle of recoil action of the ejected flow beam were utilized.

所以能达到高排放能力还有赖于：由于阀座通道截面积没有因导向筋的存在而缩小，因而介质流动畅通；不仅在阀座 通道中，而且在阀瓣打开的环状间隙处都没有涡流现象。除此而外，阀体和出口支管的通道截面积都较大。由于排放能力高，阀的阀座通道截面积可以较小，从而使阀门易于密封。

So achieving high emission capacity also depends on: because the cross-sectional area of the valve seat channel is not reduced due to the presence of guide ribs, the medium flow is smooth; There is no eddy current phenomenon not only in the valve seat channel, but also in the annular gap where the valve disc opens. In addition, the cross-sectional area of the valve body and outlet branch pipes is relatively large. Due to its high discharge capacity, the cross-sectional area of the seat channel of the safety valve can be smaller, making the valve easy to seal.

在通常的阀结构中，阀座做成与阀体分离的喷嘴形式。，所以闷座不受变形的影响。阀体与喷嘴之间的螺纹间隙的选择应使得喷嘴能够自由 膨胀而不受阀体变形的影响。对于在高温高压下使用的阀，采用"热阀瓣"并将其嵌入到阀瓣座中。喷嘴和'热阀瓣" 的尺寸和材料应选配得当，以使它们的热膨胀相同，不发生相对位移。

In a typical safety valve structure, the valve seat is made into a nozzle form that separates from the valve body., So the stuffy seat is not affected by deformation. The selection of thread clearance between the valve body and nozzle should enable the nozzle to expand freely without being affected by valve body deformation. For safety valves used under high temperature and pressure, use a "hot valve disc" and embed it into the valve disc seat. The size and material of the nozzle and the 'thermal valve disc' should be appropriately selected to ensure that their thermal expansion is the same and there is no relative displacement.

阀瓣的导向套与阀体的连接为非刚性的，并且不接触热 的或脏的介质，从而使阀容易开启和回座。阀杆和阀瓣之间通过淬火钢球来联接。这种机构能保证阀杆不受弹簧偏 斜的影响而自动对准，并且能防止阀瓣被卡住。

The connection between the guide sleeve of the valve disc and the valve body is non rigid and does not come into contact with hot or dirty media, making it easy for the safety valve to open and reseat. The valve stem and disc are connected by quenched steel balls. This mechanism can ensure that the valve stem is not affected by spring deflection and automatically aligns with the center, and can prevent the valve disc from getting stuck.

感谢您的阅读，此文的文章来源：良工阀门更多的内容和问题请点击：http://www.jnlgvf.com我们会继续努力的为您提供服务，感谢您的支持！

Thank you for reading. The source of this article is Lianggong Valve. For more information and questions, please click on: http://www.jnlgvf.com We will continue to work hard to provide you with services. Thank you for your support!